Volume 15, Issue 2 (JIAEEE Vol.15 No.2 2018)
Journal of Iranian Association of Electrical and Electronics Engineers 2018, 15(2): 107-115 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
lotfi F, sheikhi A, Biguesh M. Design of SLB with Multiple Auxiliary Antennas and Based on Detection Theory. Journal of Iranian Association of Electrical and Electronics Engineers 2018; 15 (2) :107-115
URL: http://jiaeee.com/article-1-647-en.html
URL: http://jiaeee.com/article-1-647-en.html
Department of Electrical Engineering, Shiraz University, Shiraz, Iran.
Abstract: (4228 Views)
Sidelobe blanking (SLB) is a technique employed in radar signal processing to inhibit detection when an unwanted signal enters the radar receiver through antenna sidelobes. For this purpose, an auxiliary antenna and receiver channel are used in the radar system. Comparing the main antenna and auxiliary antenna signal strength, a decision is made for blanking the main channel output. In this paper, a new SLB structure using multiple auxiliary antenna is introduced. Then, based on detection theory, two sub-optimal methods are proposed. These methods use the in-phase/quadrature-phase (I/Q) component of the received signal. Computer simulations confirm the superiority of the proposed methods from different points of view.
Type of Article: Research |
Subject:
Communication
Received: 2018/08/4 | Accepted: 2018/08/4 | Published: 2018/08/4
Received: 2018/08/4 | Accepted: 2018/08/4 | Published: 2018/08/4
Send email to the article author
| Rights and permissions | |
 |
This Journal is an open access Journal Licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. (CC BY NC 4.0) |
