Volume 15, Issue 3 (JIAEEE Vol.15 No.3 2018)
Journal of Iranian Association of Electrical and Electronics Engineers 2018, 15(3): 125-134 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Babaei E, Saadatizadeh Z. Multi-Port Zero-Voltage-Switching Bidirectional Converter for Extracting Maximum Power from Photovoltaic Module. Journal of Iranian Association of Electrical and Electronics Engineers 2018; 15 (3) :125-134
URL: http://jiaeee.com/article-1-702-en.html
URL: http://jiaeee.com/article-1-702-en.html
Department of Electrical Engineering, Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran
Abstract: (3761 Views)
In this paper, a non-isolated multi-port zero-voltage-switching bidirectional dc-dc converter is proposed. Free ripple condition of input currents is obtained by using coupled inductors in any stages. Proposed converter is analyzed as a five port converter. It is possible to increase number of input sources up to 
as a kind of port converter. The proposed converter can be used in both boost and buck operating moods. It can solve the drawbacks of conventional multi-port converters such as hard switching and large ripple of input currents. At end it is used for extracting maximum power of a photovoltaic module in presence of step variation of solar irradiance. Finally, the accuracy of zero valtage switching performance of the proposed converter in a photovoltaic system is verified thruogh the simulation results in PSCAD/EMTDC software.
as a kind of port converter. The proposed converter can be used in both boost and buck operating moods. It can solve the drawbacks of conventional multi-port converters such as hard switching and large ripple of input currents. At end it is used for extracting maximum power of a photovoltaic module in presence of step variation of solar irradiance. Finally, the accuracy of zero valtage switching performance of the proposed converter in a photovoltaic system is verified thruogh the simulation results in PSCAD/EMTDC software.
Keywords: Non isolated multi-port bidirectional dc–dc converter, Maximum Power Point Tracking (MPPT).
Type of Article: Research |
Subject:
Power
Received: 2018/10/28 | Accepted: 2018/10/28 | Published: 2018/10/28
Received: 2018/10/28 | Accepted: 2018/10/28 | Published: 2018/10/28
Send email to the article author
| Rights and permissions | |
 |
This Journal is an open access Journal Licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. (CC BY NC 4.0) |
