Volume 7, Issue 2 (Vol.7 No.2 2010)
Journal of Iranian Association of Electrical and Electronics Engineers 2010, 7(2): 51-64 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Ghassem Zadeh S, Hosseini S H, Gharehpetian G. Modeling of Wind Energy Conversion System Including
DFIG for Distributed Generation Studies. Journal of Iranian Association of Electrical and Electronics Engineers 2010; 7 (2) :51-64
URL: http://jiaeee.com/article-1-214-en.html
URL: http://jiaeee.com/article-1-214-en.html
Abstract: (3558 Views)
A detailed model of wind power station, including Double Fed Induction Generator, DFIG is presented in this paper.
Two control mechanisms are included in the model. The inner control system uses stator flux oriented control for the
rotor side converter and grid voltage vector control for the grid side converter. The outer control system is used for wind
turbine pitch angle. PSCAD/EMTDC is used for the simulation. The simulation model is used to investigate the
performance of controllers under wind speed variations, short circuit at the grid side and dynamics of active power
demand.
Type of Article: Research |
Subject:
Power
Received: 2017/02/21 | Accepted: 2017/02/21 | Published: 2017/02/21
Received: 2017/02/21 | Accepted: 2017/02/21 | Published: 2017/02/21
| Rights and permissions | |
 |
This Journal is an open access Journal Licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. (CC BY NC 4.0) |
