Volume 18, Issue 3 (JIAEEE Vol.18 No.3 2021)
Journal of Iranian Association of Electrical and Electronics Engineers 2021, 18(3): 11-19 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
paloudi S, komjani N, khanjarian M. Design, simulation and fabrication of a wideband horn antenna based on the SIW technology. Journal of Iranian Association of Electrical and Electronics Engineers 2021; 18 (3) :11-19
URL: http://jiaeee.com/article-1-965-en.html
URL: http://jiaeee.com/article-1-965-en.html
Elec. Eng. Dep., Iran University of Science and Technology. Tehran , Iran.
Abstract: (1360 Views)
In this paper, a new wideband horn antenna based on the substrate integrated waveguide (SIW) technology fed by GCPW structure with compact size(3.38λ0*2.65λ0*0.14λ0) is designed. The proposed antenna is fabricated by using two Rogers RT 6002 with the same height of 1.524mm (total thickness of 0.14λ0 at the center frequency) and εr=2.94. The proposed antenna utilizes a suitable wideband transition in the feed section and an arc-shaped metal taper printed on the extended dielectric slab with two metal posts in the horn section. By using the proposed antenna, a wide impedance bandwidth without using ridged structures is obtained. The designed antenna has a VSWR less than 2.5 across a broad frequency range 8-19.5 GHz and show acceptable and stable radiation patterns in the same frequency range.
Type of Article: Research |
Subject:
Communication
Received: 2019/08/22 | Accepted: 2020/07/14 | Published: 2021/07/16
Received: 2019/08/22 | Accepted: 2020/07/14 | Published: 2021/07/16
Send email to the article author
| Rights and permissions | |
 |
This Journal is an open access Journal Licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. (CC BY NC 4.0) |
