Volume 22, Issue 4 (JIAEEE Vol.22 No.4 2025)
Journal of Iranian Association of Electrical and Electronics Engineers 2025, 22(4): 0-0 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Qaneh Qarehbagh Y, Salehi M R. Ku Wide Band Mono-Pulsed Printed Circuit Array Antenna. Journal of Iranian Association of Electrical and Electronics Engineers 2025; 22 (4)
URL: http://jiaeee.com/article-1-1749-en.html
URL: http://jiaeee.com/article-1-1749-en.html
Department of Electrical Engineering, Imam Hossein
Abstract: (57 Views)
In this paper, the design, simulation and manufacturing of broadband mono-pulse printed circuit array antenna in KU frequency band is presented. According to the need to use a low-volume and light-weight plate structure, the optimal antenna element has been selected. The feeding network is selected and simulated according to the array antenna element. The mono-pulse pattern shape is preserved in the bandwidth range. The simulation of the final structure of the mono-pulse array was done with CST software and a bandwidth of 30% with an average gain of 23 dB was obtained. To validate the designed structure, the measurement results of the constructed antenna are compared and presented with the simulation results. The measurement results were similar to the simulation results.
Keywords: Printed Circuit Array, Wide Band Mono-Pulsed Array, High Gain Planar Array, Wide Band Planar Element
Send email to the article author
| Rights and permissions | |
 |
This Journal is an open access Journal Licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. (CC BY NC 4.0) |
