Volume 22, Issue 3 (JIAEEE Vol.22 No.3 2025)                   Journal of Iranian Association of Electrical and Electronics Engineers 2025, 22(3): 102-112 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Afsharirad H, Misaghi S. Direct Torque and Flux Control Using Rotating Vectors and Virtual Vectors in Matrix Converter for PMSM Drive to Minimize Common Mode Voltage. Journal of Iranian Association of Electrical and Electronics Engineers 2025; 22 (3) :102-112
URL: http://jiaeee.com/article-1-1663-en.html
Direct Torque and Flux Control Using Rotating Vectors and Virtual Vectors in Matrix Converter for PMSM Drive to Minimize Common Mode Voltage
Hadi Afsharirad * , Sara Misaghi
Azarbaijan Shahid Madani University
Abstract:   (1529 Views)
The use of rotating vectors in the matrix converter naturally causes the value of the common mode voltage to zero, and this is the reason why they have gained special importance. Using these vectors alone, in addition to complexity, increases torque ripple and current harmonics in direct torque control. To solve this problem, virtual vectors are used, but using virtual vectors alone will increase the switching frequency. Therefore, in our proposed method, we will use both rotating vectors and virtual vectors. In this method, the virtual vectors are placed in line with the active vectors, and the rotating vectors rotate clockwise and counterclockwise alternately in the coordinate plane. The set of these vectors can be uniformly distributed in the coordinate plane. Therefore, the use of both types of rotating and virtual vectors will reduce the switching frequency in addition to reducing torque ripple and current harmonics. The simulation results show the efficiency of this method.
 
Keywords: Matrix Converter, Direct Torque Control, Rotating Vector, Permanent Magnet Synchronous Motor.
Full-Text [PDF 2860 kb]   (172 Downloads)    
Type of Article: Research | Subject: Power
Received: 2023/11/5 | Accepted: 2024/08/11 | Published: 2025/12/12
References
1. [1] Moayedirad H, Shamsinejad M, Farshad M. Improvement of Induction Motor Drive Operation in Low and High Speeds Using Rotor Flux Compensation. Journal of Iranian Association of Electrical and Electronics Engineers 2012; 9 (2) :59-64
2. [2] Lalehzadeh M, Tavakoli A. Tuning of fuzzy controller coefficients in direct torque control with space vector modulator for the three phase induction motors drive using Metaheuristic algorithms with considering electrical faults.. Journal of Iranian Association of Electrical and Electronics Engineers 2022; 19 (4) :127-138 [DOI:10.52547/jiaeee.19.4.127]
3. [3] X. Zhang, Q.Cheng, "THE Direct Torque control of PMSMwith Dynamic Torque Hysteresis Based on Three-level Direct Matrix converter", Springer J. Electr. Eng. Technol, vol.17,pp.2801-2814, 2022, doi: 10.1007/s42835-022-01082-7 [DOI:10.1007/s42835-022-01082-7]
4. [4] K. Liu, Q.Cheng, "Research on new direct torque control strategy of TLDMC-PMSM system", Springer Electr. Eng. Technol, 2023, doi: 10.1007/s00202-023-01953-w. [DOI:10.1007/s00202-023-01953-w]
5. [5] C. Ortega, A. Arias, C. Caruana, J. Balcells and G. M. Asher, "Improved Waveform Quality in the Direct Torque Control of Matrix-Converter-Fed PMSM Drives", in IEEE Transactions on Industrial Electronics, vol. 57, no. 6, pp. 2101-2110, June 2010, doi: 10.1109/TIE.2009.2033084. [DOI:10.1109/TIE.2009.2033084]
6. [6] S. S. Sebtahmadi, H. Pirasteh, S. H. Aghay Kaboli, A. Radan and S. Mekhilef, "A 12-Sector Space Vector Switching Scheme for Performance Improvement of Matrix-Converter-Based DTC of IM Drive", in IEEE Transactions on Power Electronics, vol. 30, no. 7, pp. 3804-3817, July 2015, doi: 10.1109/TPEL.2014.2347457. [DOI:10.1109/TPEL.2014.2347457]
7. [7] C. Xia, J. Zhao, Y. Yan and T. Shi, "A Novel Direct Torque Control of Matrix Converter-Fed PMSM Drives Using Duty Cycle Control for Torque Ripple Reduction", in IEEE Transactions on Industrial Electronics, vol. 61, no. 6, pp. 2700-2713, June 2014, doi: 10.1109/TIE.2013.2276039. [DOI:10.1109/TIE.2013.2276039]
8. [8] J. Rodriguez, M. Rivera, J. W. Kolar and P. W. Wheeler, "A Review of Control and Modulation Methods for Matrix Converters", in IEEE Transactions on Industrial Electronics, vol. 59, no. 1, pp. 58-70, Jan. 2012, doi: 10.1109/TIE.2011.2165310. [DOI:10.1109/TIE.2011.2165310]
9. [9] M. Siami, D. A. Khaburi, M. Rivera and J. Rodríguez, "An Experimental Evaluation of Predictive Current Control and Predictive Torque Control for a PMSM Fed by a Matrix Converter", in IEEE Transactions on Industrial Electronics, vol. 64, no. 11, pp. 8459-8471, Nov. 2017, doi: 10.1109/TIE.2017.2703658. [DOI:10.1109/TIE.2017.2703658]
10. [10] H. -N. Nguyen and H. -H. Lee, "A Modulation Scheme for Matrix Converters With Perfect Zero Common-Mode Voltage", in IEEE Transactions on Power Electronics, vol. 31, no. 8, pp. 5411-5422, Aug. 2016, doi: 10.1109/TPEL.2015.2493339. [DOI:10.1109/TPEL.2015.2493339]
11. [11] Q. Guan, P. W. Wheeler, Q. Guan and P. Yang, "Common-Mode Voltage Reduction for Matrix Converters Using All Valid Switch States", in IEEE Transactions on Power Electronics, vol. 31, no. 12, pp. 8247-8259, Dec. 2016, doi: 10.1109/TPEL.2016.2515645. [DOI:10.1109/TPEL.2016.2515645]
12. [12] H. -N. Nguyen and H. -H. Lee, "A DSVM Method for Matrix Converters to Suppress Common-mode Voltage With Reduced Switching Losses", in IEEE Transactions on Power Electronics, vol. 31, no. 6, pp. 4020-4030, June 2016, doi: 10.1109/TPEL.2015.2471078. [DOI:10.1109/TPEL.2015.2471078]
13. [13] H. -N. Nguyen and H. -H. Lee, "An Enhanced SVM Method to Drive Matrix Converters for Zero Common-Mode Voltage", in IEEE Transactions on Power Electronics, vol. 30, no. 4, pp. 1788-1792, April 2015, doi: 10.1109/TPEL.2014.2348019. [DOI:10.1109/TPEL.2014.2348019]
14. [14] Han Ju Cha and P. N. Enjeti, "An approach to reduce common mode voltage in matrix converter", Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344), Pittsburgh, PA, USA, 2002, pp. 432-437 vol.1, doi: 10.1109/IAS.2002.1044122. [DOI:10.1109/IAS.2002.1044122]
15. [15] L. Wang et al., "A Finite Control Set Model Predictive Control Method for Matrix Converter With Zero Common-Mode Voltage", in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 6, no. 1, pp. 327-338, March 2018, doi: 10.1109/JESTPE.2017.2727501. [DOI:10.1109/JESTPE.2017.2727501]
16. [16] C. Xia, J. Zhao, Y. Yan and T. Shi, "A Novel Direct Torque and Flux Control Method of Matrix Converter-Fed PMSM Drives", in IEEE Transactions on Power Electronics, vol. 29, no. 10, pp. 5417-5430, Oct. 2014, doi: 10.1109/TPEL.2013.2293171. [DOI:10.1109/TPEL.2013.2293171]
17. [17] T. D. Nguyen and H. -H. Lee, "Modulation Strategies to Reduce Common-Mode Voltage for Indirect Matrix Converters", in IEEE Transactions on Industrial Electronics, vol. 59, no. 1, pp. 129-140, Jan. 2012, doi: 10.1109/TIE.2011.2141101. [DOI:10.1109/TIE.2011.2141101]
18. [18] J. Lei, S. Feng, B. Zhou, H. -N. Nguyen, J. Zhao and W. Chen, "A Simple Modulation Scheme With Zero Common-Mode Voltage and Improved Efficiency for Direct Matrix Converter-Fed PMSM Drives", in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 8, no. 4, pp. 3712-3722, Dec. 2020, doi: 10.1109/JESTPE.2019.2934730. [DOI:10.1109/JESTPE.2019.2934730]
19. [19] W. Deng, "Maximum Voltage Transfer Ratio of Matrix Converter Under DTC With Rotating Vectors", in IEEE Transactions on Power Electronics, vol. 36, no. 6, pp. 6137-6141, June 2021, doi: 10.1109/TPEL.2020.3033414. [DOI:10.1109/TPEL.2020.3033414]
20. [20] W. Deng, H. Li and J. Rong, "A Novel Direct Torque Control of Matrix Converter-Fed PMSM Drives Using Dynamic Sector Boundary for Common-Mode Voltage Minimization", in IEEE Transactions on Industrial Electronics, vol. 68, no. 1, pp. 70-80, Jan. 2021, doi: 10.1109/TIE.2019.2962408. [DOI:10.1109/TIE.2019.2962408]
21. [21] W. Deng and S. Li, "Direct Torque Control of Matrix Converter-Fed PMSM Drives Using Multidimensional Switching Table for Common-Mode Voltage Minimization", in IEEE Transactions on Power Electronics, vol. 36, no. 1, pp. 683-690, Jan. 2021, doi: 10.1109/TPEL.2020.2998686. [DOI:10.1109/TPEL.2020.2998686]
22. [22] W. Deng and S. Li, "Improvement of Steady State Performance for Rotating Vector-Based Direct Torque Control", in IEEE Transactions on Energy Conversion, vol. 37, no. 1, pp. 537-546, March 2022, doi: 10.1109/TEC.2021.3092786. [DOI:10.1109/TEC.2021.3092786]
23. [23] W. Deng, J. Tang and W. Cheng, "An Enhanced Rotating Vector-Based Direct Torque Control for Matrix Converter-Fed PMSM Drives Using Virtual Pulsating Vectors", in CPSS Transactions on Power Electronics and Applications, vol. 8, no. 1, pp. 65-73, March 2023, doi: 10.24295/CPSSTPEA.2023.00007. [DOI:10.24295/CPSSTPEA.2023.00007]
Add your comments about this article : Your username or Email:
CAPTCHA
Send email to the article author

Rights and permissions
Creative Commons License This Journal is an open access Journal Licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. (CC BY NC 4.0)