XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

fasihi K, nourouzi S. Design and simulation of a pressure sensor based on a two dimensional photonic crystal slab of PbMoO4. Journal of Iranian Association of Electrical and Electronics Engineers 2021; 18 (1) :109-116
URL: http://jiaeee.com/article-1-635-en.html
Golestan University
Abstract:   (2439 Views)
In this paper the design and three dimensions (3D) simulation of a photonic crystal (PC) pressure sensor is presented. The device is based on a 2D PC slab of PbMoO4. The simulations are based on finite element method (FEM) and finite-difference time-domain (FDTD) method and are done using CST STUDIO SUITE software. The sensitivity of the proposed sensor is calculated by considering the deformation and also refractive index variation factors. The numerical results show that when a pressure is applied, both factors cause to a reduction in the resonant wavelength of the transmission spectrum. It has been shown that the relationship between the applied pressure and the shift in the resonant wavelength of the cavity is linear. Based on the simulation results, the quality factor of the resonant peak of the transmission spectrum and the sensitivity of the proposed sensor are  -2.858 nm/GPa and 1040 , respectively.
Full-Text [PDF 945 kb]   (1031 Downloads)    
Type of Article: Research | Subject: Electronic
Received: 2018/07/25 | Accepted: 2019/01/27 | Published: 2021/03/21

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This Journal is an open access Journal Licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. (CC BY NC 4.0)

© 2024 CC BY-NC 4.0 | Journal of Iranian Association of Electrical and Electronics Engineers

Designed & Developed by : Yektaweb